The VIGBODY HL-5801 Indoor Exercise Bike is an affordable entry-level spinning bike that could still provide tremendous fitness results to users of different fitness levels.
Its construction is simple yet very sturdy and durable to support 330 lbs./150 kg maximum user weight capacity and it’s integrated with a 24 lbs./11 kg perimeter weighted flywheel that keeps the motion smooth and vibration-free.
You will be able to keep track of your workout progress as the LCD monitor displays metrics such as Time, Distance, Odometer, Speed, and Calories Burned. However, it doesn’t have a heart rate monitoring system but you can always use an external device to keep an eye on your target heart rate zone.
It is compact, stable, and portable; a user with a small room can afford to use it and be able to easily move from point A to point B.
Even though it’s cheap, the manufacturer offers a 12-month warranty and prioritizes customer satisfaction. You can always reach them via email; [email protected] if you have the need to.
The VIGBODY HL-5801 Indoor Exercise Bike is highly rated with the best product price at the time of this review, thus, it’s Amazon’s choice. In other words, it may not be the Sunny Health & Fitness Pro or the Keiser Indoor Cycling Bike but it’s sure one of the best spin bikes when the price is factored in.
Click right here to have a peek at the VIGBODY HL-5801 Indoor Exercise Bike
Table of Contents
The Frame and Construction
The construction of the VIGBODY HL-5801 Indoor Exercise Bike features a very sturdy and ergonomically designed 1.5mm thick steel frame that is coated with anti-corrosive paint and has ABS made belt-cover.
Its overall assembled dimensions are 46.1’’ long by 25.2’’ wide by 44.1’’ high. So, the bike needs a workout area with a perimeter of 3’9’’ length by 2’1’’ width. However, additional extra clearance of 1’ at the front/back and 2’ on each side of the bike is needed for safety and convenience reasons.
The base has a u-shaped steel stabilizer bar at the rear and a straight one at the front, and there are levelers underneath them as well. Therefore, the bike has good stability, even on a crooked floor.
Moreover, the bike is lightweight (64 lbs./29 kg.) but nevertheless, the weight further boosts its overall stability.
It is easy to relocate and move around the room once it is tilted toward the front base where the transport wheels are located.
Users usually purchase the bike along with a protective rubber mat that insulates the legs of the bike and the floor in order to prevent leaving any mark on the floor surface.
The Seat of the VIGBODY HL-5801 Indoor Exercise Bike
The VIGBODY HL-5801 Indoor Exercise Bike has a seat that is large and adequately padded. There is also a groove in the middle of it for air permeability. The seat dimensions are 10.2’’ long by 7.9’’ wide.
However, some users think it’s not comfortable enough so they opt to use a gel seat cover to enhance it.
It is also possible to completely replace it with another since its connection mechanism is standard, thus, options are widely available both in the local bicycle shop and online.
The seat is 4-way adjustable; it could be adjusted vertically (upward/downward) and horizontally (fore/aft). It can be adjusted few inches up/down (33.5’’ to 38.5’’).
Users between the heights of 5’-6’5’’ can be accommodated, but suitability entirely depends on the individual’s inseam.
The Handlebar of the VIGBODY HL-5801 Indoor Exercise Bike
The handlebar offers multiple grips that allow you to train in different postures. It is covered with a soft rubber foam that prevents slippage and sore in the palms.
As opposed to the seat, the handlebar is 2-way adjustable (vertically). The adjustment ranges between 37.8’’ – 44’’.
Both the seat and the handlebar are pretty easy to adjust and could be done within a few seconds via the adjustment knobs.
There are no EKG HR sensors on the handlebar, hence, the bike doesn’t have a heart rate monitoring function.
The VIGBODY HL-5801 Indoor Exercise Bike is equipped with toe caged pedals that have adjustable safety straps. They accommodate standard gym shoes and different sizes of feet as well.
The pedals secure the feet from slipping during an intense workout.
When assembling the bike, remember to attach the left pedal in a counterclockwise direction and the right one in a clockwise direction, and ensure that they align with the thread to avoid damage.
This is important because some users had a hard time trying to get the pedals on the bike.
They have a standard 9/16” thread, therefore, it’s possible to swap them with SPD pedals if you so wish.
The VIGBODY HL-5801 Indoor Exercise Bike is equipped with a belt drive system. It comprises of a durable belt, a solid crankset that is 7.5’’ long, crank-arms, pulleys, and the 24 lbs./11 kg perimeter weighted flywheel.
Its operation is smooth and quiet. So, you can work out without any noise interference from the bike and people around you won’t also be bothered.
It allows you to watch a TV show or listen to music with the volume at a normal range while exercising with the bike.
Maintenance won’t be required as opposed to a chain drive system.
The drive is bidirectional; meaning, it’s possible to pedal in reverse.
The Resistance System
This unit is incorporated with a variable friction resistance system that has unlimited resistance levels. This consists of thick wool felt brake pad, the flywheel, and the tension control knob.
The brake pad and the flywheel come in direct contact in order to create resistance, while the tension knob is used to adjust the resistance intensity.
There are no predefined resistance levels, simply turn the tension knob clockwise or counterclockwise to increase or decrease resistance, respectively.
Due to the friction that occurs when the resistance is applied, the brake pad tends to wear out over time and would require a replacement, but not after a long time.
Moreover, if you experience a squealing sound when the resistance is engaged, simply apply a silicon-based oil on the top surface of the flywheel to make it go away.
The resistance levels generated are suitable for everyone regardless of fitness level or physical fitness.
The VIGBODY HL-5801 Indoor Exercise Bike features a console that is pretty much basic. It features an LCD display that keeps the user motivated and focused by tracking workout stats such as Time, Distance, Odometer, Speed, and Calories Burned.
The distance and speed are measured in miles.
It also has a SCAN function that displays the workout values one at a time after every few seconds since the monitor’s screen is too small to display them all at once.
That said, you can override this to set a certain workout value you wish to view constantly.
The monitor is powered by 2 AAA batteries (included).
The VIGBODY HL-5801 Indoor Exercise Bike doesn’t have any extras. No tablet or water bottle holder, you may have to improvise or purchase them separately.
The bike is compact, lightweight, and portable. Therefore, it can easily be moved to and from storage without any hassle and it doesn’t take up much space.
- Very sturdy and durable
- Compact and portable (transport wheels integrated)
- Supports a high user weight capacity of 330 lbs./149.6 kg
- The seat is 4-way adjustable
- The handlebar is 2-way adjustable
- Pedals are toe-caged, anti-skid designed with adjustable safety straps that keep the feet secure
- Its operation is smooth and almost silent, thanks to the belt drive system
- The friction resistance system provides suitable resistance intensity for all users
- The 24 lbs./11 kg perimeter weighted flywheel provides consistent momentum
- The LCD display keeps the user motivated and focused as it tracks workout progress
- Low maintenance
- Easy to assemble
- No heart rate monitoring function
- No tablet or water bottle holder
- 12 Months warranty
Product Dimensions and Specifications
- Length 46.1’’
- Width 25.2’’
- Height 44.1’’
- Shipping dimensions: 35’’ X 8.7’’ X 32.9’’
- Weight: 64 lbs./29 kg.
- Shipping weight: 70 lbs./31.7 kg
- Maximum user weight capacity: 330 lbs./149.6 kg
- Drive: Belt
- Resistance: Friction
- Seat: 4-way adjustable
- Handlebar: 2-way adjustable
- Pedals: Toe cages
- Console: Nonbacklit LCD monitor tracks, Time, Distance, Odometer, Speed, and Calories Burned
- Frame: 1.5mm thick steel
- Flywheel: 24 lbs./11 kg
- Heart rate monitoring: No
- Tablet holder: No
- Water bottle holder: No
- Transport wheels: Yes
The VIGBODY HL-5801 Indoor Exercise Bike is shipped out in a box that weighs 70 lbs./31.7 kg with dimensions of 35’’ x 8.7’’ x 32.9’’.
Amazon ships it out for free and make delivery in a couple of days. However, the number of days it takes to make delivery depends on where you live.
The unit is easy to assemble.
Once it is delivered, you only need to unbox it and attach the front and rear stabilizer bars, the seat/handlebar posts, the seat, the handlebar, the pedals, and the console to the main core unit.
These only take about 30 minutes or a little more to completely accomplish.
An instruction manual that guides you through the assembly process is included in the package and so are the tools needed for the job as well.
There is no maintenance required other than to always keep the bike dry and clean at all times.
Do a routine check for any loose or broken part before using the bike.
The VIGBODY HL-5801 Indoor Exercise Bike is a very affordable bike that might be within the budget of many who wishes to acquire indoor cycling for home use.
And it does provide that opportunity for you to work out and lose weight, improve overall physical fitness in the comfort of your home.